Pedro's
Product Description
Pedro's Master Tool Kit 4.0 - 59-Tool Professional Event Kit in Wheeled Case
Pedro's Master Tool Kit has been used by mechanics at events since 2004. The 4.0 edition updates everything: 59 professional tools including many new and updated items, plus an extensive selection of 1/4in hex bits, covering drivetrain, bottom bracket, crank, pedal, cassette, chain, wheel, brake, torque and cleaning work.
The heavy-duty wheeled case is built to be customised. A lid-mounted panel pre-drilled with a 325-hole array and a multi-position lower divider with more tappable holes let you lay out tools your way, using the included clips, tap and screws. Two parts trays with hinged lids nest inside the case for transport or mount outside with slots for staging tools, and the Burrito Tool Roll II hangs flush on the front of the case as a tool board.
Key Features
- 59 professional tools plus an extensive selection of 1/4in hex bits
- Includes Pro Chain Tool 3.2, Fixed Torque Driver 5Nm, full hex/Torx sets, BB and cassette sockets, chain whip and pliers
- 56 x 35 x 23cm heavy-duty wheeled case
- Lockable, dustproof (IP6X), waterproof (IP7X) and MIL-spec certified
- Heavy-duty latches and automatic pressure release valve
- 3 handles: 2 carry, 1 retracting
- Customisable lid panel and lower divider (two primary positions, three sub-positions)
- Parts trays nest inside or mount outside the case
- Burrito Tool Roll II hangs on integrated hooks on the front of the case
- Total kit weight 14.7kg
- Case backed by a lifetime warranty
In the Box
- Pro Travel Pedal Wrench (also a socket driver for Pedro's socket tools)
- Cable Cutter
- Diagonal Cutter Pliers - 150mm (6in)
- Toothbrush drivetrain cleaning brush
- The Hammer - 275mm, 550g, replaceable plastic face
- Pro TL II Hex wrenches: 3, 4, 5, 6mm
- Pro TL II Torx wrenches: T10, T25, T30
- Quick Link Pliers
- Disc Wrench - 7 and 8mm flare wrench and rotor truing slot
- Utility Knife
- Crowfoot Flare Wrench - 7 and 8mm, 1/4in drive
- Splined BB Socket - 3/8in drive
- 8mm Hex Driver II
- Tyre Levers (pair)
- T-Handle Bit Drive
- Ratcheting Combo Wrenches - 9 and 10mm
- L Hex Set - 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
- L Torx Set - T10, T15, T20, T25, T27, T30, T40
- Freewheel Socket, Multi-Speed 12-Spline x 23mm
- Pro Cassette Lockring Socket with Pin (5mm guide pin and removable 12mm pin)
- Hex Bit Set, 1/4in hex, 25mm: JIS #1 and #2 Phillips, 5mm flat blade, 2, 2.5, 3, 4, 5, 6mm hex, T10, T15, T20, T25, T30 Torx, plus 1/4in hex to 1/4in square adapter
- Hex Bit Set, 1/4in hex, 50mm: 4 and 5mm hex, T25 and T30 Torx
- External Bottom Bracket Socket 16x44
- BB Socket Holder II
- Compact Crank Puller
- Adjustable Wrench - 250mm (10in), opens to 33mm
- Pro Chain Whip - 270mm, fixed-gear lockring wrench
- Needle Nose Pliers - 150mm (6in)
- Pro Chain Tool 3.2
- Pro Spoke Wrench Set - 3.23, 3.30, 3.45mm
- Chain Checker Plus II
- Tape Measure
- Downhill Tyre Lever - 275mm steel
- Pro Chain Keeper (12mm thru-axle compatible)
- Fixed Torque Driver 5Nm (with 4mm, 5mm and T25 bits)
- Pro Bit Driver - JIS #1 and #2 Phillips, 5mm flat blade
- Pro Bit Driver - 2 and 2.5mm hex, T25 Torx
- Crank Adjusting Cap Driver (Shimano Hollowtech II)
- Heavy-duty wheeled case, 56 x 35 x 23cm
- Burrito Tool Roll II with x-frame poles and hang strap
- 2 x parts trays with removable hinged lids
- Upper case tool panel (325-hole array)
- Lower case divider panel with divider mounts
- Foam spacer
- Tool clips: 6mm x 10, 10mm x 10, 13mm x 5, 16mm x 10, 19mm x 5
- 50 x M2.5x0.45 clip mounting screws
- M2.5x0.45 tap
- 20 x spare panel mount screws
How to Use
- Burrito x-frame: take the pole halves from their storage slots (keep the rubber end caps) and join them. Lay the Burrito face down, fit one pole into a corner pocket and the diagonally opposite corner, flexing it slightly; repeat with the second pole.
- Hanging the Burrito: fit the x-frame first, push the case latches flat, fold the Burrito flap tightly to the back, and hold it by the hang strap while pressing its hooks into the holes on the front of the lower case.
- Adjusting the divider: loosen the mounting screws with a #2 Phillips, move the divider mounts to the desired position and slot, then refit.
- Custom clips: thread any panel hole with the included M2.5x0.45 tap and fit clips with the clip mounting screws.
Good to Know
- The holes on the front of the lower case can also be used to padlock the case (no padlock is listed in the contents).
Care & Safety
Case mounting screws should be tightened by hand only until snug. Do not over-tighten.
Shipping Policy
We pay shipping on orders over $150 to Nationwide addresses, excluding Rural addresses and some Bulky items.
Orders under $150 cost $7.99
Rural order fee $4.99
Aerosol and Dangerous Goods fee $9.99
For a specific delivery ETA based on the exact item(s) you want to purchase, please call us at 0800 793 593 or message us via Chat before placing an order.
We understand that when you make an order, you want your parts as quickly as possible and we will do our best to make that happen! Most of the items we sell will ship quickly and be at your door fast. If urgent freight is required, we work closely with our vendors in order to have the product shipped directly to you from their warehouse if that means you will get the product faster.
Items will have an availability status shown once a size/color is selected on the product page; this availability status will also be shown on the shopping cart page and in your order confirmation email. Most products will be marked "In Stock". These products will ship within 1-2 business days.
While we will do our best to ship from the distribution center closest to you, not all items will always be in stock in every location at all times. In some cases we will split the order and ship each package out to you individually and in other cases we may need to consolidate the items in one location to ship out as one package. We utilize our best judgment in an attempt to get the products to you as quickly as possible.
A shipping confirmation email including courier specific tracking information will be sent the same day as the item ships.
RETURNS POLICY
Returns
Our policy lasts 90 days. If 90 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 90 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at sales@moto1.nz.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at sales@moto1.nz
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
To return your product, please email us to receive instructions.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

- Choosing a selection results in a full page refresh.

