PCW
Product Description
NAMZ Custom Cycle Products Complete Bike Harness
NAMZ Complete Bike Harness with Starter Relay, 3-Circuits, Self Canceling and Run, Brake & Turn Signal Module
The NCBH-01-A complete motorcycle harness is the perfect start for any project bike or OEM model re-wire.
OEM color-matching harness with 11-second self canceling turn signal module
Fuse block holds a full size, commonly available & replaceable starter relay and (3) ATO fuses
A 30-Amp circuit breaker is installed and is ready for any regulator/charging system
Harness provides running light and turn signal functions to the front turn signals, run, brake and turn signal functions for the rear turn signals
Oil, neutral, high beam, and turn signal indicator wiring
Color matching handlebar switch wiring as found on '96-'13 non-glide models
Headlight wiring with headlight socket and terminals
Front turn signal connectors and terminals
Rear fender harness with connectors and terminals
Key switch wiring with ring terminals
Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals
Sections of 3/16 in., 1/4 in., 3/8 in. and 1/2 in. ID heat shrink included
Heavy gauge 12 (+) power and (-) ground wires with terminals for battery connection
NOTE : Key start switches can be used with a simple wiring modification. (Ignition system and key switch are not included with this harness)
NOTE : Works with any stand alone, Evo or Twin Cam ignition system. Designed to operate with a two-position key switch
Included Items:
(1) Wire harness
(1) 1/2 in. ID x 4' shrink tubing
(1) 3/8 in. ID x 2' shrink tubing
(1) 1/4 in. ID x 6' shrink tubing
(1) 1/8 in. ID x 4' shrink tubing
(1) 3/16 in. ID x 6' shrink tubing
(4) Black flag wire terminals
(2) 1/4 in. ring terminals
(1) Headlight socket
(3) Female spade connectors
(1) 1/4 in. ring terminals
(5) 3/16 in. ring terminals
(1) Headlight socket
(3) Female spade connectors
(1) 1/4 in. cap terminal
(2) Orange wedge locks
(2) Green wedge locks
(12) Male bullet terminals
(12) Female bullet terminals
(1) Black female 6 pin plug
(1) Black male 6 pin plug
(1) Gray male 6 pin plug
(1) Female 6 pin plug
(10) Female bullet terminals
(10) Male bullet terminals
(1) Black flat male 6 pin plug
(1) Black flat female 6 pin plug
(1) Black flat male 4 pin plug
(1) Black flat female 4 pin plug
Instructions
FITMENT INFORMATION
NAMZ Complete Bike Harness with Starter Relay & 3-Circuits (2019 Ver-1)
Part Number : NCBH-01-C
NCBH-01-C
NAMZ Custom Cycle Products Complete Bike Harness
NAMZ Complete Bike Harness with Starter Relay, 3-Circuits, Self Canceling and Run, Brake & Turn Signal Module
The NCBH-01-A complete motorcycle harness is the perfect start for any project bike or OEM model re-wire.
OEM color-matching harness with 11-second self canceling turn signal module
Fuse block holds a full size, commonly available & replaceable starter relay and (3) ATO fuses
A 30-Amp circuit breaker is installed and is ready for any regulator/charging system
Harness provides running light and turn signal functions to the front turn signals, run, brake and turn signal functions for the rear turn signals
Oil, neutral, high beam, and turn signal indicator wiring
Color matching handlebar switch wiring as found on '96-'13 non-glide models
Headlight wiring with headlight socket and terminals
Front turn signal connectors and terminals
Rear fender harness with connectors and terminals
Key switch wiring with ring terminals
Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals
Sections of 3/16 in., 1/4 in., 3/8 in. and 1/2 in. ID heat shrink included
Heavy gauge 12 (+) power and (-) ground wires with terminals for battery connection
NOTE : Key start switches can be used with a simple wiring modification. (Ignition system and key switch are not included with this harness)
NOTE : Works with any stand alone, Evo or Twin Cam ignition system. Designed to operate with a two-position key switch
Included Items:
(1) Wire harness
(1) 1/2 in. ID x 4' shrink tubing
(1) 3/8 in. ID x 2' shrink tubing
(1) 1/4 in. ID x 6' shrink tubing
(1) 1/8 in. ID x 4' shrink tubing
(1) 3/16 in. ID x 6' shrink tubing
(4) Black flag wire terminals
(2) 1/4 in. ring terminals
(1) Headlight socket
(3) Female spade connectors
(1) 1/4 in. ring terminals
(5) 3/16 in. ring terminals
(1) Headlight socket
(3) Female spade connectors
(1) 1/4 in. cap terminal
(2) Orange wedge locks
(2) Green wedge locks
(12) Male bullet terminals
(12) Female bullet terminals
(1) Black female 6 pin plug
(1) Black male 6 pin plug
(1) Gray male 6 pin plug
(1) Female 6 pin plug
(10) Female bullet terminals
(10) Male bullet terminals
(1) Black flat male 6 pin plug
(1) Black flat female 6 pin plug
(1) Black flat male 4 pin plug
(1) Black flat female 4 pin plug
Instructions
FITMENT INFORMATION
NAMZ Complete Bike Harness with Starter Relay & 3-Circuits (2019 Ver-1)
**** PLEASE NOTE ***** : NCBH-01-C
These are performance and custom aftermarket products sourced to match or exceed original specifications as an alternative to the OEM version. Any Harley-Davidson part numbers referenced are for identification purposes only.
Shipping Policy
We pay shipping on orders over $150 to Nationwide addresses, excluding Rural addresses and some Bulky items.
Orders under $150 cost $7.99
Rural order fee $4.99
Aerosol and Dangerous Goods fee $9.99
For a specific delivery ETA based on the exact item(s) you want to purchase, please call us at 0800 793 593 or message us via Chat before placing an order.
We understand that when you make an order, you want your parts as quickly as possible and we will do our best to make that happen! Most of the items we sell will ship quickly and be at your door fast. If urgent freight is required, we work closely with our vendors in order to have the product shipped directly to you from their warehouse if that means you will get the product faster.
Items will have an availability status shown once a size/color is selected on the product page; this availability status will also be shown on the shopping cart page and in your order confirmation email. Most products will be marked "In Stock". These products will ship within 1-2 business days.
While we will do our best to ship from the distribution center closest to you, not all items will always be in stock in every location at all times. In some cases we will split the order and ship each package out to you individually and in other cases we may need to consolidate the items in one location to ship out as one package. We utilize our best judgment in an attempt to get the products to you as quickly as possible.
A shipping confirmation email including courier specific tracking information will be sent the same day as the item ships.
RETURNS POLICY
Returns
Our policy lasts 90 days. If 90 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 90 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at sales@moto1.nz.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at sales@moto1.nz
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
To return your product, please email us to receive instructions.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
- Choosing a selection results in a full page refresh.