Motobatt Battery Quadflex AGM - MB7CA

Replace the weak old bottle-filled design with the longest-lasting reliable battery.

Motobatt MB7CA was designed to replace the standard and sometimes hard-to-find battery fitted to the Yamaha TW200 since way back in 1989. The AGM factory-activated design is much less prone to self-discharge and degradation vs old flooded designs. It also has more amp hour capacity and CCA, allowing for spotlights and other electronic farm aids to be added.

Specifications:

Voltage: 12V
C(10) Ah: 8.5
C(20) Ah: 9
CCA (Cold Cranking Amps): 125A
MCA (Marine Cranking Amps): 178A
PHCA (Pulse Hot Cranking Amps): 338A
Dimensions (LxWxH): 129 x 89 x 114mm (5.08 x 3.50 x 4.49)
Polarity: C
Terminals: 2x Screws M6x12 (PART MPS4)
Replaces: YB7C-A

Features:

• 20% more Amp Hour capacity

• 20% more Cold Cranking Amps

• Heavy-duty pure lead calcium cast grids for high strength

• More surface area per plate for superior performance and longevity

• Military-grade absorbed glass mat separators, vibration resistant

• Multi-terminal design, easy to add accessories

• Factory Activated, no acid to fill, simply check charge and go!

• Extremely low self-discharge rate

Founded in 2008, Motobatt is a manufacturer of premium Powersports batteries, battery chargers and battery related accessories. Motobatt is the creator and holds patents all over the world for the Motobatt 4 terminal battery that facilitates flexible battery installation across a wide variety of vehicles while maintaining an OE like fit.

Specifically designed for motorcycles, Motobatt batteries offer much higher cranking power and higher amp hour ratings. Their batteries can withstand constant starting without draining the battery or causing long term cell damage.

Motobatt batteries are manufactured from Absorbed Glass Mat (AGM), this design has revolutionised the motorcycle, ATV, lawnmower and small engine industry. All Motobatt AGM Batteries are maintenance free, non-hazardous, non-spill, charged and ready to install directly out of the box.

Each plate in the battery is wrapped in a fiberous glass matting which not only absorbs all liquid electrolyte but keeps the plates separated in a cushioned environment. This stops the plates from vibrating which can breakdown the plate and cause short circuits between the plates or break plate welds which result in battery failure. The thick, heavy plates used in Motobatt designs really make the difference.

AGM batteries also have a much lower inherent self-discharge rate than wet flooded types. And, as a higher amp hour AGM battery, the Motobatt battery can also discharge more deeply and recover repeatedly under the vehicle alternator charge or through maintenance charging. A standard flooded cell battery is not capable of withstanding this type of cycling without premature failure.

Your Motobatt is a Factory Activated battery, it comes to you pre-conditioned and fully charged for optimum performance and ready to install out of the box. 80% of early Powersports battery failure is caused by faulty activation of the dry battery plates. Additionally, you never have to mess with acid or top up fluid levels or remove corrosion from the terminals caused by gassing, which are all common with standard flooded battery types.

MOTOBATT BATTERIES ARE AVAILABLE VIA COURIER DELIVERY AS THEY CONTAIN NO LIQUID ACID!