Skip to content

Free Shipping over $149*

Main Navigation

RMSTATOR

Stator Yamaha YZ65 '18-'24 & YZ85 '02-'24 (RMS010-108281)

SKU: RMS010108281
2 In Stock Ready to be shipped from our NZ Warehouse
  • NZ Warehouse
  • No Stock In-Store
For store pickup please contact us.

Regular price $320.39
Regular price $355.99 Sale price $320.39

In stock online Only 2 left

Ships from our NZ warehouse in 1–2 business days

Out of stock online

Check back for further stock

Moto1 Paeroa: In storeNot in store

For store pickup please contact us

  • Free NZ shipping over $149 (excl. rural & bulky items)
  • Ships in 1–2 business days from our NZ warehouse
  • 90-day returns
  • NZ price match
Shipping details
Returns policy

Price match request

Stator Yamaha YZ65 '18-'24 & YZ85 '02-'24 (RMS010-108281) SKU RMS010108281 Our price $320.39

We'll match a lower advertised price from another New Zealand retailer on the same item (same brand, model, colour and size). Clearance products are excluded.

Found it cheaper overseas? Send it through anyway. Once GST and freight are added the gap often closes, and we'll compare it on a landed-cost basis.

Product Description

Brand new aftermarket stator.

  • Direct replacement to the original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connectors included
  • Rubber grommet included
  • Back Plate included
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare The item to the original part.

Before installing the new stator:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator rectifier.
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

The stator might have a different wire colThe code than the original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If The stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Dimensions:

  • Interior diameter: 27 mm
  • Exterior diameter: 109 mm
  • Thickness: 32.6 mm
  • Length of wires stator to grommet: 135 mm
  • Length of wires grommet to plug: 410 mm
  • Length of pickup coil's wire to grommet: 135 mm

Other specifications:

  • Number of wires: 6
  • Number of plugs: 1
  • Number of pins: 6
  • Number of poles: 4
  • Wire to wire resistance:
  • Pickup: White/Blue to White/Red = 293 ohms +/-20%
  • Source: Green/White to Black/Red = 858 ohms +/-20%
  • Source: Black to Green/Blue = 53 ohms +/-20%
x