{"product_id":"rmstator-rms900106254","title":"SPLYT TECHNOLOGY STATOR + TWIN REGULATOR KIT (RMS900-106254)","description":"\u003cp\u003eRMSTATOR SPLYT Technology provides a reliable solution to common charging system failures. Featured by Dirt Trax Television, this system uses a dual-output stator with two completely separate stator windings. The power generated is split between two voltage regulators, allowing each regulator to handle only half the original load. This reduces operating temperatures and improves reliability.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eSeries Voltage Regulation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike traditional regulators that shunt excess power to ground, SERIES regulators protect the battery from high voltage by disconnecting the stator coils from the regulator and preventing current from passing through. This reduces heat generation and operating temperatures.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eUltimate Reliability\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eStock charging systems often operate voltage regulators within 5% of their maximum capacity, creating heat and stress that can lead to failure. With the RMSTATOR SPLYT system, both SERIES regulators operate with 40% overhead for longer service life and stable output.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eBetter Design\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eUnlike the original OEM stator, which uses a single three-phase winding, the SPLYT stator has two completely separate three-phase windings. Each winding produces half the power of the stock stator, reducing the temperature of each individual coil.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMore Available Power\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eFor vehicles running additional accessories such as lighting, stereos or winches, the SPLYT kit is available with an upgraded flywheel that increases power output from 650 W to 900 W.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAll components feature a plug-and-play design like the original OEM parts, making installation straightforward without requiring special tools or technical knowledge.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eRelocation Harnesses Included\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe included relocation wiring harnesses allow both regulators to be mounted elsewhere on the vehicle for improved airflow and easier access.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eThis Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDual-output stator\u003c\/li\u003e\r\n\u003cli\u003eTwo SERIES voltage regulators\u003c\/li\u003e\r\n\u003cli\u003eTwo automotive-grade relocation wiring harnesses with OEM-quality heavy-duty connectors\u003c\/li\u003e\r\n\u003cli\u003eComplete voltage regulator relocation instructions\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eResolve Polaris RZR and Sportsman charging system issues with RMSTATOR SPLYT Technology.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant Notice:\u003c\/strong\u003e This kit includes two wiring harnesses in accordance with Polaris recall # Z-16-01-C (OEM # 2206620, 2206367 and 2206473). Relocating both regulators is strongly recommended to prevent premature wear caused by mud, dust and rocks.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eBefore Installing the New Stator\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCheck the AC output of the stator.\u003c\/li\u003e\r\n\u003cli\u003eReplace any burned or corroded connectors on the stator and regulator rectifier.\u003c\/li\u003e\r\n\u003cli\u003eCheck and repair any melted wiring.\u003c\/li\u003e\r\n\u003cli\u003eApply high-temperature dielectric grease to all connectors.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe stator may use a different wire colour code from the original part. All wires are installed in the correct order; do not change the wiring configuration. This stator is designed as a direct plug-in replacement. Always use thread-locking compound when securing the stator bolts. If the stator includes a pickup coil, check the air gap during installation. Adjust it as close as possible, but no less than 0.010 inches.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eBefore Installing the New MOSFET Voltage Regulator Rectifier\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCheck the AC output of the stator.\u003c\/li\u003e\r\n\u003cli\u003eReplace any burned or corroded connectors on the stator and regulator rectifier.\u003c\/li\u003e\r\n\u003cli\u003eCheck and repair any melted wiring.\u003c\/li\u003e\r\n\u003cli\u003eApply high-temperature dielectric grease to all connectors.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eRelocation Harness\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePlug-and-play, direct fit.\u003c\/li\u003e\r\n\u003cli\u003eApply high-temperature dielectric grease to all connectors.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eRisk of electric shock. Disconnect the battery before servicing. Installation should be carried out by a qualified technician to avoid malfunction.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eDual Stator Dimensions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eInterior diameter: 53 mm\u003c\/li\u003e\r\n\u003cli\u003eExterior diameter: 125 mm\u003c\/li\u003e\r\n\u003cli\u003eThickness: 26 mm\u003c\/li\u003e\r\n\u003cli\u003eStator-to-grommet wire length: 125 mm\u003c\/li\u003e\r\n\u003cli\u003eGrommet-to-plug wire lengths: 290 mm and 550 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eOther Specifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNumber of wires: 6\u003c\/li\u003e\r\n\u003cli\u003eNumber of plugs: 2\u003c\/li\u003e\r\n\u003cli\u003eNumber of pins: 6\u003c\/li\u003e\r\n\u003cli\u003eNumber of poles: 18\u003c\/li\u003e\r\n\u003cli\u003eAlternator resistance: Yellow\/black to yellow\/black = 0.5 ohms ±20%\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eRegulator Dimensions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWidth: 84 mm\u003c\/li\u003e\r\n\u003cli\u003eLength: 90 mm\u003c\/li\u003e\r\n\u003cli\u003eHeight: 32 mm\u003c\/li\u003e\r\n\u003cli\u003eMounting hole centre-to-centre distance: 69 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eOther Specifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNumber of plugs: 2\u003c\/li\u003e\r\n\u003cli\u003eNumber of pins: 5\u003c\/li\u003e\r\n\u003cli\u003eMinimum charging voltage: 14.5 V ±0.5 V\u003c\/li\u003e\r\n\u003cli\u003eMaximum charging current: 50 A \/ 500 W\u003c\/li\u003e\r\n\u003cli\u003eOpen-circuit voltage: \u0026lt; 15 V\u003c\/li\u003e\r\n\u003cli\u003eOperating temperature: -20°C to 85°C\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eRelocation Harness Dimensions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWire length: 2400 mm\u003c\/li\u003e\r\n\u003cli\u003eNumber of yellow wires: 3\u003c\/li\u003e\r\n\u003cli\u003eNumber of red wires: 1\u003c\/li\u003e\r\n\u003cli\u003eNumber of black wires: 1\u003c\/li\u003e\r\n\u003cli\u003eNumber of plugs: 2\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"RMSTATOR","offers":[{"title":"SPLYT TECHNOLOGY STATOR + TWIN REGULATOR KIT (RMS900-106254)","offer_id":40259274702896,"sku":"RMS900106254","price":1230.99,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0031\/4012\/4739\/files\/RMS900106254_02d0fd20-7919-4995-a8bc-0b58b817313d.jpg?v=1780209215","url":"https:\/\/www.moto1.nz\/products\/rmstator-rms900106254","provider":"Moto1","version":"1.0","type":"link"}